The RTCU product line currently includes 8 different hardware variants covering a broad range of I/O configurations, environments and applications. The RTCU A5i, D4, A9i and M11i Series units are offered in two functionality variants: MICRO and MAX. The MICRO version can be programmed only with the functionality in the Infocall Micro program, or the customers own MICRO application.
All products are available in the MAX version that allows full programmabilty using the functionality in the Infocall All In One program, or the customers own MAX application.

 The RTCU product comparison feature chart can be viewed here

Infocall Products

RTCU MX2 Professional

The RTCU-MX2 Professional is the first member belonging to the new "X32-Generation" of RTCU products based on a high performance industry leading ARM architecture.
The RTCU MX2 Professional includes all the features common for the previous generation of RTCU products, but adds a very important and long list of new and enhanced features seriously expanding the application areas of the product.

The RTCU-MX2 Professional feature-list includes:

Up to 10 times faster execution than previous generation RTCU products

100% Software compatible
Applications already written for the previous RTCU generation will run without changes.

Huge memory capacity

Standard SD-CARD reader with FAT compatible file-system for PC-compatibility

5 Digital inputs, 4 Digital high-side solid state outputs and 2 analog inputs

Full CAN 2.0B controller with hardware filtering

2 Serial ports

1-Wire bus for connecting devices such as ID Button Reader and Temperatur sensors.

Quad Band GSM support (850/900/1800/1900 Mhz)

GPRS Class 10 with full GPRS Gateway Professionel Support

High performance low-power 12-Channel GPS-receiver

On-board high capacity Li-Ion battery

Vibration sensor with adjustable sensitivity

Temperature sensor

Piezo Buzzer for audible notification

Nokia compatible headset connector

Real-time clock with battery back-up

Advanced Power-management with power-down and wait-for-event modes
Wake-up on: Digital input, Vibration, Timeout, GSM-, CAN- or RS232-activity

Highly expandable with future options:
Bluetooth, WiFi, Ethernet, CMOS Camera module, Mobile data Terminal.

Optional Mounting Bracket Kit for easy "screw-on" installations.

....many other advanced features
Please read the Datasheet and Technical Reference Manual below

    Download Datasheed

-- Ordering code: RT-MX2P
-- Ordering code: RT-O-MX2BR (Mounting Bracket Kit)


 

RTCU M11Gi MAX

The RTCU M11Gi MAX is a "facelifted" version of the RTCU M11G unit with important enhancements as requested by our customers.
The enhancements includes upto 8 Mbyte of additional Flash memory for data intensive applications and the use of a 12-channel GPS receiver. Also the recovery of GSM related problems such as modem lock-up and/or base-station problems will be recovered much faster on the RTCU M11Gi unit. The RTCU M11Gi is fully "plug-compatible" with the RTCU M11G.

The RTCU M11Gi MAX has 512 KByte flash memory for datalogging/parameters and support for voice/DTMF user interaction. As a factory installed option the flash memory can be upgraded with additional 8 Mbyte for data intensive applications.

The unit is especially designed for mobile GPRS enabled applications. The product is supplied in a metal enclosure well suited for mounting in vehicles with external connection for dual band GSM antenna (SMA female), GPS antenna (SMB Male), power, headset connector, 1-Wire/iButton interface and digital/analog I/O. 

The unit has 5 digital inputs (including ignition input), 4 relay outputs, 4 analog inputs and two RS232 serial ports (same pinout as a standard PC com port), one of them selectable as RS485 (option). The RTCU-M11G MAX is powered with 9..36VDC. 
There is an on-board 12 Channel GPS-receiver, a temperature sensor and the possibility to connect 1-Wire devices such as an ID-Button Reader or Temperatur sensors. 

The unit has support for voice/DTMF user interaction. The RTCU-M11G MAX unit has support for advanced powerdown / deepsleep features for low power consumption.

The RTCU M11G MAX can be used together with the optional Battery Backup Module for uninterruptible operation during an external power failure.

Fully programmable from within the RTCU IDE development environment.

The unit has all the necessary approvals, including the 95/54/EC / ECE-R10 (E1) approval for automotive electronics.

Download Datasheed
 
-- Ordering code: RT-M11GI (on-board GPS receiver)
-- Ordering code: RT-M11GIXF8 (on-board GPS receiver, additional 8 MB dataflash)

 

RTCU M11i MAX

The RTCU M11i MAX is a "facelifted" version of the RTCU M11 unit with important enhancements as requested by our customers.
The enhancements includes up to 8 Mbyte of additional Flash memory for data intensive applications. Also the recovery of GSM related problems such as modem lock-up and/or base-station problems will be recovered much faster on the RTCU M11i unit. The RTCU M11i is fully "plug-compatible" with the RTCU M11.

The RTCU M11i MAX has 512 KByte flash memory for datalogging/parameters and support for voice/DTMF user interaction. As a factory installed option the flash memory can be upgraded with additional 8 Mbyte for data intensive applications.

The unit is especially designed for mobile GPRS enabled applications. The product is supplied in a metal enclosure well suited for mounting in vehicles with external connection for dual band GSM antenna (SMA female), GPS antenna (SMB Male), power, headset connector, 1-Wire/iButton interface and digital/analog I/O. 

The unit has 5 digital inputs (including ignition input), 4 relay outputs, 4 analog inputs and two RS232 serial ports (same pinout as a standard PC com port), one of them selectable as RS485 (option). The RTCU-M11i MAX is powered with 9..36VDC. 
There is an on-board temperature sensor and the possibility to connect 1-Wire devices such as an ID Button Reader or Temperatur Sensors.

The unit has support for voice/DTMF user interaction. The RTCU-M11i MAX unit has support for advanced powerdown / deepsleep features for low power consumption.

The RTCU M11i MAX can be used together with the optional battery backup Module for uninterruptible operation during an external power failure.

Fully programmable from within the RTCU IDE development environment.

The unit has all the necessary approvals, including the 95/54/EC / ECE-R10 (E1) approval for automotive electronics.

Download Datasheed

-- Ordering code: RT-M11I
-- Ordering code: RT-M11IXF8 (additional 8 MB dataflash)
 

RTCU A9i MAX

The RTCU A9i MAX product is a compact and easy installable unit. Encapsulated in a IP67 class plastic enclosure with 3 PG9 cable glands and a SMA female connector for easy connection to a GSM dual band antenna. The unit has 4 digital inputs, 4 relay outputs, 4 analog inputs and 4 analog outputs and is powered with either 230VAC or 18..26VDC.
The unit has full GPRS support, one extra serial port, advanced power-saving features, and on-board temperature sensor.
The 4 digital inputs can be configured as S0-compatible (IEC 62053-31) inputs for connection to electricity/gas/water meters. The RTCU A9i also includes support for 1-Wire/iButton and an optional NiMh battery backup package.
The unit is fully GPRS Gateway compatible and it supports SMS, Voice/DTMF and Datacalls. Fully programmable from within the RTCU IDE development environment.
Optional RS485 support.

Download Datasheed

-- Ordering code: RT-A9i
 

RTCU A5i MAX

The RTCU A5i MAX represents a low-cost version of the RTCU A9i MAX units. Compared to the RTCU A9i MAX this unit is a "small" memory unit, no GPRS capability, no analog outputs, no RS485 capability and no temperature sensor. The feature list is therefore almost identical to the, now obsoleted, RTCU A6 MAX unit.
Fully programmable from within the RTCU IDE development environment. 

Download Datasheed

-- Ordering code: RT-A5I

RTCU D4 MAX

The RTCU D4 MAX product is delivered in a M36 DIN enclosure for mounting on standard DIN rail (EN50022) with a SMA female connector for easy connection to a GSM dual band antenna. The unit has 12 digital inputs, 12 digital outputs, 4 analog inputs and 4 analog outputs and is powered with 8..34VDC. The unit comes standard with a backlit 2 x 16 characters LCD display. Using RS485 the I/O can be extended using the RTCU D4 CTRL product. The unit has 512 KByte memory for datalogging/parameters and support for voice/DTMF user interaction. Fully programmable from within the RTCU IDE development environment.
Optional RS485 support.

Download Datasheed


-- Ordering code: RT-D4

RTCU D4 CTRL

The RTCU D4 CTRL product is exactly the same hardware as the RTCU D4 MAX but without the GSM module mounted. This makes the unit suitable for standalone operation or for I/O extending an RTCU D4 MAX (or any other RTCU unit with RS485 support).
Delivered standard with RS485 support.

Download Datasheed

-- Ordering code: RT-D4C
 

RTCU M11Gi/M11i/A9i/A5i/D4 MICRO

The MICRO product variant is based on exactly the same hardware as the MAX versions described under each separate product, but delivered without the possible to program the unit from the RTCU IDE programming environment. Only the 
Infocall Micro Standard Application can be programmed into the unit, or any other MICRO enabled application the customer might have. The standalone
Infocall RTCU Programming Tool must be used for programming a MICRO unit.
The RTCU MICRO Standard application offers extremely easy setup/use of the unit for simple applications not requiring the full flexibility of the RTCU IDE programming environment. The pre-programmed functionality allows generating SMS-messages and/or calling up with user recorded voice message on the leading and/or falling edge of an input. By sending a user defined SMS-message or calling the unit using voice/DTMF the outputs can be controlled. Temperature monitoring and GPS functionality for geofencing is also included in the standard application. The configuration is perfomed either by sending SMS-messages to the unit or by using the Infocall  RTCU Micro Configuration Tool available free of charge. Any RTCU MICRO unit can be very easy software upgraded to full MAX functionality when required.
Please note that a MICRO unit is delivered without GPRS support as standard, but can be later upgraded with GPRS (if available on the specific unit)

-- Ordering code: Add 'M' to the MAX variants, like RT-A5IM
 

RTCU GPRS Gateway Professional.

The RTCU GPRS Gateway Professional is an advanced alternative to the standard RTCU GPRS Gateway and incorporates many new and important features:
Advanced server architecture supports thousands of clients.
Runs as a Windows Service. This means that the Gateway service will start without Windows logon and can also be remotely managed as a service.
Remote access via the included Windows GUI or via TELNET.
Full password protection for remote access.
Up to 10 client keys supported, for more flexible password management.
Disconnect timeout for inactive clients.
Advanced filtering feature allows monitoring/logging on specific client and/or logging level.
Designed for several thousand clients and massive traffic.
Encrypted traffic for safer communication.
Compressed traffic. Reduces cost of communiation.
Comes with a comprehensive user documentation.
Free for evaluation with up to 10 clients.
License must be purchased for additional clients.


-- Ordering code: RT-GGWPRO
 

GPRS Upgrade & Deployment Server.

The GPRS Upgrade & Deployment Server (UDS) offers sophisticated features for Upgrade & Deployment of a number of RTCU units in operation. The UDS can be configured by the user to insure that the specified units are running the correct firmware and application. The UDS will automatically upgrade the units as requested and this task will even take place during FULL unit operation. Any interruption in an upgrade attempt will be automatically handled and resumed to avoid any waste of expensive bandwidth.

The following features are available:
Uses the RTCU GPRS Gateway Professional to establish a connection to remote units.
Upgrades firmware and application automatically according to user-configuration.
Firmware and application can be upgraded during full operation of the unit.
This unique feature minimizes downtime and the impact on the user.
Failed upgrade attempts will automatically be resumed at the point of interruption.
This unique feature will reduce the cost and time of upgrading.
Automatically or application driven decision when to switch over to the new application/firmware. All that is required to switch over to the new firmware/application is a reset of the unit, which will only interrupt the operation for 10-20 seconds.
Up to 100 simultaneous upgrade sessions.
Supports applications that use VPL upgrade notifications.
Support for automatic programming of un-programmed factory delivered unit.
Comprehensive logging and status features.
Comes with full user documentation.


-- Ordering code: RT-UPGSRV 

RTCU GPRS Gateway

The Logic IO GPRS GATEWAY is a software solution that allows easy
communication and access to remote units connected using the revolutionary
GPRS technology. The product is especially suited in cases where the GSM
operator does not offer a fixed IP-address. With the Logic IO GPRS GATEWAY
product the remote units can easily be accessed without any need for
expensive IP-tunneling solutions provided by the GSM-operators. 
Free upto 250 clients. 

Download Datasheed


-- Ordering code: RT-GGW1

 

Infocall Accessories / Options

Mobile Data Terminal for the RTCU MX2 Professional

The Mobile Data Terminal (MDT) extends the RTCU MX2 Professional with a flexbile and easy to use user-interface solution with many advances features, allowing all kinds of two-way messaging applications to be implemented. 
The Mobile Data Terminal is easily connected to the RTCU MX2 Professional and includes the following features:

Case material: UV stabilised, high temperature, Bayblend

LCD: 160 x 80 pixels, 4 grey levels, FSTN, B/W, -10 to 60°C

Backlight: Electroluminescent, user selectable level

Mounting 8 mounting holes fitted with brass inserts and suction cup vehicle  mount

Buzzer, Type: Piezoelectric.

Volume control: Frequency and level adjustable

Keypad Type: 13 tactile keys

Application development for the Mobile Data Terminal is easily archived with easy to use high-level library functions accessable from the RTCU-IDE.

-- Ordering code: RT-O-MDT1          (not yet available)             
 

TYCO Mate'N'Lock Connector accessories  for the RTCU MX2 Professional

The RTCU MX2 Professional uses the TYCO Mate'N'Lock connector type for most of its external interfacing 
The following TYCO Mate'N'Lock are available for the RTCU MX2 Professional:

4 pins Connector house for the Power-connector
Ordering code: RT-O-TYCO-H4

6 pins Connector house for the Serial port 1-connector
Ordering code: RT-O-TYCO-H6

12 pins Connector house for the Communication-connector
Ordering code: RT-O-TYCO-H12

16 pins Connector house for the I/O-connector
Ordering code: RT-O-TYCO-H16

Crimp contacts. Bag with 40 pcs. for full cable installation
Ordering code: RT-O-TYCO-CR

Crimp hand tool for crimp assembly
Safe, fast and easy crimp cable assembly.
Ordering code: RT-O-TYCO-TOOL
 

Sandisk SD-CARD approved for use with the RTCU MX2 Professional product
The RTCU MX2 Professional can access an industry standard SD-CARD memory card using the FAT file-system for full Microsoft Windows file sharing compatibility.
Any SD-CARD compliant memory card should work, but the following Sandisk products available from Logic IO is recommended:

Sandisk 128 MByte SD-CARD
Ordering code: RT-O-SDC128M

Sandisk 256 MByte SD-CARD
Ordering code: RT-O-SDC256M

Sandisk 512 MByte SD-CARD
Ordering code: RT-O-SDC512M

Sandisk 1 GByte SD-CARD
Ordering code: RT-O-SDC1G

Sandisk 2 GByte SD-CARD
Ordering code: RT-O-SDC2G
 

RTCU M11 / M11i  Series Internal Battery Backup Module

The internal Battery Backup module for the RTCU M11/M11i Series offers uninterruptable operation even when a power failure of the external power supply occurs. The Backup Battery module is easy installable and is available with 1400 mAh capacity. The firmware support for the Battery Backup module includes notification of power failure and also a low battery indication when the battery voltage drops below a hardware programmed threshold. An advanced charge circuit is integrated into the Battery Backup Module, this ensures a quick and correct charge of the batteries. By integrating the charger into the Battery Backup Module the sophisticated charge process is taken out of the hands of the user. When the charger is enabled the batteries will be charged once a day (scheduled by firmware) or whenever a power failure have occured. These automated mechanism will insure an always fully charged Battery Backup Module ready for use.

Download Datasheed


-- Ordering code: RT-O-M11BATH (1400 mAh)              
 

RTCU A9i / A5i Internal Battery Backup Package

The RTCU A9i /A5i Internal Battery Backup package for the RTCU A9i and RTCU A5i offers uninterruptable operation even when a power failure of the external power supply occurs. The Backup Battery module is easy installable and has a capacity of 700 mAh @ 12 Volt. The firmware includes functionality to get the current voltage of the Battery Backup Package and to start/stop the charging.

-- Ordering code: RT-O-A9-BAT (700 mAh)              
 

RTCU A9i / A5i Wall Mount Kit

The RTCU A9i /A5i Wall Mount Kit includes 4 cornes mounting brackets for easy Wall mounting of the RTCU A9i or RTCU A5i.

-- Ordering code: RT-O-A9-WM1
 

iButton - ID Button for user identification

This ID Button can be read by a iButton reader connected to a RTCU M11/M11i series or RTCU A9i for easy and secure identification of a person/item identified with a unique ID button. This can be used for numerous applications: driver identification, turning alarm on/off, usage registration etc.

-- Ordering code: RT-O-1W-ID1
 

iButton - ID Button Fobs

This ID Button Fob holds the ID Button in place so that it is convenient available whenever needed. Available in black color.

-- Ordering code: RT-O-1W-FOB1
 

iButton - ID Button Reader

This ID Button Reader is used for reading the ID Button above. It is supported in the hardware and firmware of the RTCU M11/M11i series, the RTCU A9i and the new RTCU MX2 Professional product.
Comes with 3 meter cable and includes a LED that can be controlled from software.
Can easily be mounted in the dashboard of a car.

-- Ordering code: RT-O-1W-IDRD1 (M11/M11i Series)
-- Ordering code: RT-O-1W-IDRD2 (A9i/MX2 Professional)

 

External Temperature sensor

This 1Wire based external temperature sensor can measure temperatures from -55 to 125 degress celcius with a precision of 0.5 degress celcius.
Supported in the firmware on the RTCU A9i, M11/M11i series and the new RTCU MX2 Professional
Comes standard with 3 meter cable. 



-- Ordering code: RT-O-1W-TEMP1 (M11/M11i Series)
-- Ordering code: RT-O-1W-TEMP2 (A9i/MX2 Professional)
 

RTCU GSM Dualband whip antenna

This small GSM Dual band antenna with a SMA male connector can be mounted directly onto the RTCU MX2, M10/M11/M11i Series, A9i/A5i and D4. Length 185 mm.

-- Ordering code: RT-GSM-WHIP2
 

RTCU GSM Dualband window antenna

This is a compact window GSM Dual band antenna with a SMA male connector and 3 meter cable.  


-- Ordering code: RT-O-GSM-WIN1
 

RTCU GSM Dualband DOTCOM antenna

This is a round and small GSM antenna, only ø33 x 7 mm. Very easy to hide with a SMA male connector and 2,5 meter cable.  

-- Ordering code: RT-O-GSM-DOTCOM
 

RTCU GPS Active Antenna with magnet.

This compact GPS antenna with a SMB female connector and 3 meter cable is waterproof and includes a powerfull magnet for easy installation. Can be connected directly to the MX2 and M10G/M11Gi.
-- Ordering code: RT-GPS-ANT3
 

RTCU "round" GPS Active Antenna

This is a round and small GPS antenna, only ø39 x 13 mm. Very easy to hide. Comes with a SMB female connector and 2,5 meter cable. Can be connected directly to the MX2 and M10G/M11Gi. 


-- Ordering code: RT-O-GPSANT2
 

RTCU Combined "round" GSM/GPS Antenna

This is a low-cost combined GSM/GPS antenna for easy installation.
It has a SMB female connector for the GPS and a SMA male connector for the GSM part. ø77 × 15 mm. Comes with 3 meter cable and can be connected directly to the MX2 and M10G/M11Gi. Must be mounted with the adhesive side facing the sky.

-- Ordering code: RT-O-GPSGSM2
 

RTCU Combined Roof GSM/GPS Antenna

This is a low-cost Roof GSM/GPS antenna for easy installation outside on the roof-top.
It has a SMB female connector for the GPS and a SMA male connector for the GSM part. Comes with 5 meter cable and can be connected directly to the MX2 and M10G/M11Gi.

-- Ordering code: RT-O-GPSGSM3
 

RTCU IDE Programming Environment on CD-ROM

The RTCU IDE Programming Environment can also be downloaded FREE from www.

-- Ordering code: RT-IDE
 

RTCU Programming Cable

This programming cable is used for communicating with the RTCU A5/A9/D4/A6/DIN units from the RTCU IDE program.

-- Ordering code: RT-O-PCA
 

RTCU Programming Cable for the RTCU-M10 and RTCU-M11

This programming cable is used for communicating with the RTCU-M10/M11 unit from the RTCU IDE program.

-- Ordering code: RT-O-PCAM10
 

RTCU Programming Cable for the RTCU-MX2 Professional

This programming cable is used for communicating with the RTCU-MX2 Professional unit from the RTCU IDE program.

-- Ordering code: RT-O-PCAMMX2
 

PC-CARD RS232 Adaptor for Laptop

The PC-CARD RS232 Adaptor is used to extend any portable PC with a RS232 port required for communication with the RTCU Products.
Works much more reliable and faster than USB<->RS232 converters.

-- Ordering code: RT-O-PC-SER1
 

Option: RS485

The RS485 option can be specified when ordering the RTCU M11i Series, RTCU A9i, RTCU D4 and the RTCU MX2 Professional.
 
-- Ordering code: RT-O-RS485


RTCU Citect SCADA driver

Citect driver support for the complete line of RTCU Products has been developed in co-operation with Vikingegaarden. More information can be found on

-- Ordering code: RT-O-CIT (Specify when ordering RTCU units)


Udskriv denne side | Tilbage